I know guys. Finally a little work and other post!
I took some time off to do other things for a while. It's good to have a change and get a few things done. It's not a race. I just want to get it done in a timely manner and still have fun. It was getting stressful trying to finish by spring, so I'm getting re-established.
Sure feels good to work on it again. I bought a few air tools, few more parts as you can see from the last photos in picture link also on the right of this blog . Working on the cowling but also measuring and fitting a few items. June, I'll move to a hangar at Paine Field, coming up quickly. Thanks for reading!
Thursday, May 24, 2012
Monday, April 2, 2012
Post 25 - Another Move
I made a fairly easy decision to move to my house, the shop that I build with friends, to work on the fuselage more before finding a great deal on a hangar at Paine Field. I'll have about 40 hrs of work after the wings go on. The wings won't go on till I move to the airport. I'll get as much done as I can at home in the meantime.
This will save some commuting time, although flying some of the commutes was half the fun. The last post had some details, conservatively. I'll post more details later. Moving photo here and the next few pics at my shop, settling in.
This will save some commuting time, although flying some of the commutes was half the fun. The last post had some details, conservatively. I'll post more details later. Moving photo here and the next few pics at my shop, settling in.
Tuesday, March 27, 2012
Post 24 - A Turning Point
Ok, I'm at my next turning point on the glasair project. The current hangar I'm in is just too busy with income projects. We've been getting along great, but the income jobs are important to the owner so I have to find a new place to build and finish (divide and conquer). Next, I will either:1. move to my house shop, 2. move to another hangar at Arlington, or 3. Find a place at Paine Field. I need a new plan to finish the plane. I won't be able to put the wings on at my house, but its alot closer than Arlington. I need a place at Paine Field soon, than I can put the wings on when ready
(aw below=after wing)
I could use good idea's but my home is likely where to move for a short while.
This shows about 36 hrs of time of things to do after the wing, 171 hours total, very roughly:
(aw below=after wing)
I could use good idea's but my home is likely where to move for a short while.
This shows about 36 hrs of time of things to do after the wing, 171 hours total, very roughly:
| Project | time | when | info | |||||||||||
| cowling1 | 4 | sand the old air vent and finish/paint | ||||||||||||
| cowling2 | 6 | airscoop finish | ||||||||||||
| cowling3 | 4 | index pins | ||||||||||||
| cowling4 | 4 | headlight fixture | ||||||||||||
| cowling5 | 4 | camera | ||||||||||||
| electrical1 | 3 | wing lights to wing bus | ||||||||||||
| electrical2 | 4 | servo wing to bus | ||||||||||||
| electrical3 | 2 | headlight | ||||||||||||
| electrical4 | 3 | camera | ||||||||||||
| electrical5 | 5 | aw | all to panel | |||||||||||
| electrical6 | 5 | other - all connectors, other dynon | ||||||||||||
| timing | 2 | electric mag | ||||||||||||
| cable | 3 | radio, elt & trx to antenna | ||||||||||||
| fuel sys | 15 | aw | firewall aft, all lines, tests | |||||||||||
| air | 5 | pitot & static | ||||||||||||
| tunnels | 2 | 2 (light wires, servo, air.. ) & (antennas) | ||||||||||||
| trim | 4 | aw | trim set up | |||||||||||
| dorsalfin | 4 | finish sanding | ||||||||||||
| paint1 | 11 | fuselage | ||||||||||||
| paint2 | 3 | wing spots | ||||||||||||
| paint3 | 3 | interior - navy blue | ||||||||||||
| paint4 | 1 | engine touch up | ||||||||||||
| leather | 11 | interior | ||||||||||||
| brake fluid | 1 | |||||||||||||
| pedal stops | 3 | build fiberglass | ||||||||||||
| pitch servo | 2 | limiter & check clevis for clearance | ||||||||||||
| baffling | 4 | finish | ||||||||||||
| electric system | 4 | review and mark | ||||||||||||
| panel | 3 | labels | ||||||||||||
| placards | 2 | panel, px, experimntl…. | ||||||||||||
| cabin | 4 | feet box (2 under heels & 2 side panels) | ||||||||||||
| stick | 3 | handle, ptt & covers | ||||||||||||
| level & tow in | 4 | aw | ||||||||||||
| seat | 3 | underbuild, padding, seat belts & closure | ||||||||||||
| prop | 3 | install | ||||||||||||
| spinner | 5 | cut & install | ||||||||||||
| flaps | 11 | sand, instl, trim inbd | ||||||||||||
| door latch | 3 | & canopy instl | ||||||||||||
| calibrate | 5 | aw | Dynon system | |||||||||||
| fuse/wing fairing | 3 | aw | after flaps | |||||||||||
| transponder | certify | |||||||||||||
DAR walk grnd test |
everything |
|||||||||||||
| flt test | ||||||||||||||
| wheel fairings | aw=after wing |
Sunday, March 25, 2012
post 24 - Sunday
Today, I flew to Skagit Regional Airport. I had it planned to work on my Cessna at Oak Harbor but Tom was busy with Steve's plane so I flew back to Arlington to work on mine. Very nice day for flying outside.
Today, I finished re-mounting my autopilot roll servo and linkages to the controls. Glassed the inside and outside of the lower cowling to cover the old air intake and close the new scoop. Also completed the turnbuckles and Nico's on the rudder controls. I also got to put new main tires on my Cessna. That took a few hours, but glad to get it done. Also to mention, I ripped apart an old navy blue leather couch for it's upholstery. I will use it for the interior of my glasair. My wife helped me wash the pieces as well as clean the old masking tape off my canopy!
There's a few more photo's chronologically added at the end of the photo album. Link is on the right.
Today, I finished re-mounting my autopilot roll servo and linkages to the controls. Glassed the inside and outside of the lower cowling to cover the old air intake and close the new scoop. Also completed the turnbuckles and Nico's on the rudder controls. I also got to put new main tires on my Cessna. That took a few hours, but glad to get it done. Also to mention, I ripped apart an old navy blue leather couch for it's upholstery. I will use it for the interior of my glasair. My wife helped me wash the pieces as well as clean the old masking tape off my canopy!
There's a few more photo's chronologically added at the end of the photo album. Link is on the right.
Thursday, March 22, 2012
Short Post #23
I've worked out a few issues and still moving along. Not an easy job to sometimes design while fabricating parts.
The rudder cables were difficult to swage to length, so I ordered turnbuckles (arrived today). They will help for adjustments in the future and I noticed there are many airplanes that use turnbuckles on the control cables.
The throttle body and new air intake hung well below the lower cowling. What to do? Cut a big hole in the cowling and decide what to do later. OK, its done. Now, I show up after work, and someone found an extra air scoop in somebody's hangar! It's nice to have friends around. Now we have to match the intake with the scoop and its in work. Purchased more shape-able foam, glued it in place and already laying fiberglass from the cowling to the scoop. This is a big project but looks OK so far. Bill has help me with the foam shaping and sanding, along with two more fiberglass layers on the outside of the lower cowling to close the old air intake.
The roll servo for the Dynon autopilot has been temporarily installed but Terry didn't like the location. I'm in the process of moving it 1/2" lower and aft. It will be fine when complete. Brake system is complete and will put fluid in soon and bleed the system. Dynon replaced one of the servo's since I removed the shear pin while fabricating an attach plate that interfered....thanks Dynon!
Need to create two tunnels from the empannage for wires, antenna's and air for pitot/static system. Need to stabilize design for headlight, but have a few idea's. A few new pics in the album and moving along with some progress!
The rudder cables were difficult to swage to length, so I ordered turnbuckles (arrived today). They will help for adjustments in the future and I noticed there are many airplanes that use turnbuckles on the control cables.
The throttle body and new air intake hung well below the lower cowling. What to do? Cut a big hole in the cowling and decide what to do later. OK, its done. Now, I show up after work, and someone found an extra air scoop in somebody's hangar! It's nice to have friends around. Now we have to match the intake with the scoop and its in work. Purchased more shape-able foam, glued it in place and already laying fiberglass from the cowling to the scoop. This is a big project but looks OK so far. Bill has help me with the foam shaping and sanding, along with two more fiberglass layers on the outside of the lower cowling to close the old air intake.
The roll servo for the Dynon autopilot has been temporarily installed but Terry didn't like the location. I'm in the process of moving it 1/2" lower and aft. It will be fine when complete. Brake system is complete and will put fluid in soon and bleed the system. Dynon replaced one of the servo's since I removed the shear pin while fabricating an attach plate that interfered....thanks Dynon!
Need to create two tunnels from the empannage for wires, antenna's and air for pitot/static system. Need to stabilize design for headlight, but have a few idea's. A few new pics in the album and moving along with some progress!
Wednesday, March 14, 2012
Build Log 22 - March
I had three issues come up lately; the cowling airbox was interfering with the fuel boost pump box, so I removed the airbox. It wasn't in the best location anyway which is an excuse to move it to a forward facing air intake for the injected throttle body. The Glasair air intake was interfering with the throttle so I sent it back and ordered the Van's forward air intake. This was a solution for both mentioned issues. The Dynon roll servo is normally installed in the wing near the aileron control arm around butt line 100 (100" outboard in the wing) but the wing is closed. I will install under the seat, connecting to an aileron arm coupling.
Let me see if I can update relative to last log:
Completed lately:
Rudder cables moved build sequence in front of wing attachment. Cables with covers and end fittings installed but not adjusted. Injected throttle body air box received from Vans, and now partially assembled. I'm adding the optional air bypass flapper assembly including a cable. More sanding on the dorsal fin, canopies cleaned more thorough and ready to remove adhesive. New landing light tested and is very bright! Installed ELT remote switch on panel. Redesigned ELT brackets for easier removal from airplane. I designed and fabricated a bracket and location for the Dynon pitch servo for autopilot. It's now mounted in the empennage control tunnel connected to the elevator bell crank. It mounted perfectly and will test later. The servo arm displacement matches the bell crank movement so I am happy.
View the latest photos to see some of the progress.
Next:
Adjust rudder pedals in order to install rudder stops. Bring roll servo to Dynon to check shear pin. Fabricate/install servo limiter. Paint for white exhaust and navy blue for interior. Get old couch material for interior and glare shield and adhesive in place. Check clevis bolts on pitch servo for interference. Finish right brake connector & pack right wheel bearing. Air box complete. Cowling review for intake. Switch/breaker layout w/Terry AND create labels is in work. Cut/fasten spinner. Headlight system designed... need to fabricate. Two Empannage systems paths for static port air, strobe light power supply, radio, ELT and transponder antenna, Dynon trim servo wires. Lower cowling needs light cutout, camera cutout, air cutout and closure of old NACA inlet complete. Upper cowling (7) locks. Tail wheel fairing and main gear wheel pants at hangar for fit. Finish electrical connectors at wingtip lights, pitot probe, Dynon roll servo & bus bar under seats. Remote fwd camera needs cockpit display monitor. Sand and finish few spots on dorsal fin, horiz. stabilizer and lower flaps & lower cowling. Spark plug adapters? Electronic mag to be timed/installed. Paperwork for MIDO office, letter and receipt for FAA registry office has been submitted & needs to be checked. Tail dragger review at Harvey Field.
Again, my tail number on the Glasair is N88ET or eight eight echo tango. Battery to instrument panel and POWER ON complete!
Let me see if I can update relative to last log:
Completed lately:
Rudder cables moved build sequence in front of wing attachment. Cables with covers and end fittings installed but not adjusted. Injected throttle body air box received from Vans, and now partially assembled. I'm adding the optional air bypass flapper assembly including a cable. More sanding on the dorsal fin, canopies cleaned more thorough and ready to remove adhesive. New landing light tested and is very bright! Installed ELT remote switch on panel. Redesigned ELT brackets for easier removal from airplane. I designed and fabricated a bracket and location for the Dynon pitch servo for autopilot. It's now mounted in the empennage control tunnel connected to the elevator bell crank. It mounted perfectly and will test later. The servo arm displacement matches the bell crank movement so I am happy.
View the latest photos to see some of the progress.
Next:
Adjust rudder pedals in order to install rudder stops. Bring roll servo to Dynon to check shear pin. Fabricate/install servo limiter. Paint for white exhaust and navy blue for interior. Get old couch material for interior and glare shield and adhesive in place. Check clevis bolts on pitch servo for interference. Finish right brake connector & pack right wheel bearing. Air box complete. Cowling review for intake. Switch/breaker layout w/Terry AND create labels is in work. Cut/fasten spinner. Headlight system designed... need to fabricate. Two Empannage systems paths for static port air, strobe light power supply, radio, ELT and transponder antenna, Dynon trim servo wires. Lower cowling needs light cutout, camera cutout, air cutout and closure of old NACA inlet complete. Upper cowling (7) locks. Tail wheel fairing and main gear wheel pants at hangar for fit. Finish electrical connectors at wingtip lights, pitot probe, Dynon roll servo & bus bar under seats. Remote fwd camera needs cockpit display monitor. Sand and finish few spots on dorsal fin, horiz. stabilizer and lower flaps & lower cowling. Spark plug adapters? Electronic mag to be timed/installed. Paperwork for MIDO office, letter and receipt for FAA registry office has been submitted & needs to be checked. Tail dragger review at Harvey Field.
After wing installed:
- Fuel lines aft of firewall. Complete linkage between wing and rudder pedals, elevator trim system, and flap stop adjustments & pitch servo stop. Calibrate and multi-configure Dynon system (zero system, inclination and magnetic intensity). New transponder antenna needs to attach to lower wing panel cover. Flap clearance, Seat bulkhead then door latches. Contact FAA inspector for review. pg G-59 instrument side/feet panels & door latches.
Again, my tail number on the Glasair is N88ET or eight eight echo tango. Battery to instrument panel and POWER ON complete!
Saturday, March 3, 2012
Build Log 21
I've taking a small hiatus from writing but still progressing on the plane. Firewall forward (engine area) has been the focus lately. I'll try to catch up on most items here. For paperwork, I'm in the process of registering with the FAA. My tail number on the Glasair is now N88ET or eight eight echo tango. Still further to go for paperwork, but progressing. Some discussion with the local DAR from MIDO and I think it will all go well.
View the latest photos to see some of the progress.
Next:
Finish right brake connector & pack right wheel bearing. Air intake when part arrives & Cowling review for intake. Switch/breaker layout w/Terry AND create labels. Install ELT switch on panel. Clean masking tape off windows. Cut/fasten spinner. Headlight system designed... need to fabricate. Two Empannage systems paths for static port air, strobe light power supply, radio, ELT and transponder antenna, Dynon trim servo. OK Dynon trim servo with Terry and fabricate. Lower cowling needs light cutout, camera cutout, air cutout and cover old NACA inlet that was for carburetor. Upper cowling (7) locks. Tail wheel fairing and main gear wheel pants at hangar for fit. Finish electrical connectors at wingtip lights, pitot probe & bus bar under seats. Remote fwd camera needs cockpit display monitor. Sand and finish few spots on dorsal fin, horiz. stabilizer and lower flaps & lower cowling. Under seat electric bus& Dynon roll servo. Spark plug adapters? Electronic mag to be timed/installed. Paperwork for MIDO office, letter and receipt for FAA registry office. Tail dragger review at Harvey Field.
Throttle/mixture/heat cables complete. Throttle/mixture connected/finished at throttle body and instrument panel. almost completed baffling (pg G107) including holes and attachments. Fuel lines fwd of firewall complete. Dynon fuel flow transducer, oil and pressure and all Dynon probes complete. New ELT antenna installed. Oil cooler re-connected and lines re-routed. Designed locations and mounting of A/P servos. FAA issued tail# N88ET. Research HID headlight complete and at hand. Battery to instrument panel and POWER ON complete.
View the latest photos to see some of the progress.
Next:
Finish right brake connector & pack right wheel bearing. Air intake when part arrives & Cowling review for intake. Switch/breaker layout w/Terry AND create labels. Install ELT switch on panel. Clean masking tape off windows. Cut/fasten spinner. Headlight system designed... need to fabricate. Two Empannage systems paths for static port air, strobe light power supply, radio, ELT and transponder antenna, Dynon trim servo. OK Dynon trim servo with Terry and fabricate. Lower cowling needs light cutout, camera cutout, air cutout and cover old NACA inlet that was for carburetor. Upper cowling (7) locks. Tail wheel fairing and main gear wheel pants at hangar for fit. Finish electrical connectors at wingtip lights, pitot probe & bus bar under seats. Remote fwd camera needs cockpit display monitor. Sand and finish few spots on dorsal fin, horiz. stabilizer and lower flaps & lower cowling. Under seat electric bus& Dynon roll servo. Spark plug adapters? Electronic mag to be timed/installed. Paperwork for MIDO office, letter and receipt for FAA registry office. Tail dragger review at Harvey Field.
After wing installed:
- Fuel lines aft of firewall. Rudder pedal stops, complete linkage between wing and rudder pedals, elevator trim system, and flap stop adjustments. Calibrate and multi-configure Dynon system (zero system, inclination and magnetic intensity). New transponder need attach to lower wing panel cover. Flap clearance, Seat bulkhead then door locks. Contact FAA inspector for review.
Throttle/mixture/heat cables complete. Throttle/mixture connected/finished at throttle body and instrument panel. almost completed baffling (pg G107) including holes and attachments. Fuel lines fwd of firewall complete. Dynon fuel flow transducer, oil and pressure and all Dynon probes complete. New ELT antenna installed. Oil cooler re-connected and lines re-routed. Designed locations and mounting of A/P servos. FAA issued tail# N88ET. Research HID headlight complete and at hand. Battery to instrument panel and POWER ON complete.
Subscribe to:
Comments (Atom)